HAL Bangalore Freshers recruitment

 

 

Job Description

 

HAL Bangalore Complex is currently looking candidates for appointment as Chief Manager / Senior Manager / Manager / Medical Superintendent / Senior Medical Officers / Engineers / Assistant Engineers.

 

4 BC/A/14/2008 Assistant Engineer (Gr-I) ? 5 Posts. Reserved for PWD ? HH? PD * (3 HH ? UR, 1 HH ? SC, 1 HH ? OBC) Mechanical / IMM Degree / PG Degree in Mechanical Engineering. Degree in Mechanical with PG degree / diploma /MBA in Materials Management is desirable for IMM Discipline 

 

9 BC/A/09/2008 Engineer (Gr-II) ? 2 Posts (2 UR) Safety Degree in Mechanical Engineering with Diploma in Industrial Safety from Regional Labor Institute recognized by the Government of Karnataka

 

10 BC/A/10/2008 Engineer (Gr-II) ? 10 Posts (6 UR, 4 OBC) Mechanical Degree / PG Degree in Mechanical Engineering

 

11 BC/A/11/2008 Engineer (Gr-II) ? 2 Posts (1 UR, 1 OBC) Electrical & Electronics Degree / PG Degree in Electrical & Electronics Engineering

 

12 BC/A/12/2008 Engineer (Gr-II) ? 1 Post (UR) Environmental Degree in Environmental engineering or Chemical engineering or Civil engineering with at least two electives in Environmental engineering. 13 BC/A/13/2008 Engineer (Gr-II) ? 2 Posts (UR Electronics & Communication Degree / PG Degree in Electronics & Communication Engineering

 

Grade /Scale

Pay Scale Approx CTC per year Max Age as on 31.12.07 Experience (Years) for Technical Discipline Experience (Years) for Medical Discipline MBBS  MBBS + PG Diploma MBBS + PG Degree Gr-I Basic pay is Rs.8950/- in the scale of pay of Rs.6550-200-11350  Rs.5.21 Lakhs 40 Gr-II Basic pay is Rs.10850/- in the Scale of pay of Rs.8600-250-14600  Rs.5.85 Lakhs 40 2

 

 

AGE LIMIT & RELAXATION

Age and experience are to be counted as on 31.12.2007. Reservation / concessions for candidates belonging toSC/ST/OBC/XSM & PWD categories would be made as per Government Directives. Upper age limit is relax able by 5 years in respect of SC/ST candidates and 3 years in respect of OBCcandidates. Candidates belonging to the OBC Category are required to produce recently obtained Community Certificate in proof of their Community at the time of Interview (not older than 6 months as on 31.12.2007),stating that they do not come under the creamy layer, from a Competent Authority, in the prescribed format and Candidates belonging to the SC/ST/PWD Category are also required to produce their Community Certificate inproof of their Community at the time of Interview in the prescribed format.

 

In respect of Persons with Disabilities (PWDs), upper age limit is relax able by 5 years for the post at Sl.No.3 andby 10 years for the posts mentioned at Sl.No.14, which will be over and above the relaxation admissible for candidates belonging to SC/ST/OBC mentioned above. However, Age should not exceed 55 years.For candidates who had ordinarily been domiciled in the State of Jammu & Kashmir during the period of 01-01-1980 to 31-12-1989, upper age limit is relax able by 5 years. Relaxation will be extended as per rules in respect of Ex-servicemen/ Commissioned Officers/ECOs/ SSCOswho have rendered at least 5 years of Defiance service and have been released on completion of assignment.

 

APPLICATION FEE

Rs.200/-, which is non-refundable, is to be sent in the form of crossed Demand Draft drawn on any Nationalized Bank(preferably Indian Bank or State Bank of India) in favour of ?Hindustan Aeronautics Limited?, payable at Bangalore.Candidates belonging to SC / ST / PWD category are exempted from payment of Application Fee. The Demand Draftshould have been obtained between the period 30.01.2008 and 09.02.2008

 

HOW TO APPLY

Applications should be submitted strictly ?ONLINE? by logging on HAL Website www.hal-india.com . Applications willnot be accepted in any other mode. The last date for submission of application is 09.02.2008. The website will be keptopen between 1100 hours on 30.01.2008 till 2400 hours on 09.02.2008 for this purpose. Candidates are allowed toapply only once and Application once submitted cannot be altered under any circumstances. Candidates are required to posses a valid E-mail ID, which is to be entered in the Application Blank, so that intimation regarding downloading ofcall letter for Interview can be sent. HAL will not be responsible for bouncing of E-mail sent to the candidate. Candidatesother than SC/ST and PWD are required to furnish the details of Demand Draft in orderto register their applicationonline. On submission and acceptance of application system will generate an Application reference number, which willbe used for future references. The candidate is required to write his / her name, the Application reference numberallotted and post applied for on the reverse side of Demand Draft, which should be forwarded to the following address,subscribing on the envelop, in bold, the post applied for, discipline and advertisement No. so as to reach latest by 12.02.2008.

 

 

The Deputy General Manager (P&A)

HAL, Bangalore Complex

Post Bag No.1785

Vimanaupura Post

Bangalore ? 560017

Ph : 080 ? 25221020 Extn : 426

 

 

HAL Sample Placement Paper For The Executive Trainee 2003 (Technical)

 

Sample Questions for the Executive Trainees (Technical )

 

Aeronautical Engineering

 

1. Air Fuel ratio in a jet engine will be of the order of:

 

(a) 10:1 (b) 15:1

(c) 20:1 (d) 60:1

 

2. Fighter bombers use following type of engine:

 

(a) Turbo-jet (b) Turbo-propeller

(c) Rocket (d) Ram-jet

 

Mechanical Engineering

 

1. Least shrinkage allowance is provided in the case of following:

 

(a) Brass (b) Aluminum

(c) Cast Iron (d) Steel

 

2. If V is the volume of metal in a casting and A its surface area, the time of solidification will be proportional to:

 

(a) V, 1/A (b) V,1/A2

(c ) V2 ,1/A (d) V2, 1/A2

 

3. Fire tube boilers are limited to a maximum design working pressure of :

 

(a) 1 kg/cm2 (b) 6 kg/cm2

(C) 17 kg/cm2 (d ) 100 kg/cm2

 

Metallurgy

 

1. A dislocation represented by T is called:

 

(a) Positive edge dislocation

(b) Negative edge dislocation

(c) Positive screw dislocation

(d) Negative screw dislocation

 

2. The recrystallisation temperature of a cold worked material decreases with:

 

(a) Increase in the degree of deformation

(b) Increase in the initial grain size

(c) Increase in the temperature of cold working

(d) The presence of impurity

 

Electrical Engineering

 

1. In a thyrister full converter feeding a continuous load current, what is the duration each thyrister conducts in a cycle?

 

(a) 60 0 (b) 90 0

(c) 120 0 (d) 180 0

 

2. In a three-phase induction motor, the rotor field runs at the following speed with Respect to the stator structure:

 

(a) At synchronous speed in the direction of stator field

(b) At a slip speed in the direction of stator speed

(c) At synchronous speed in a direction opposite to that of stator field

(d) At zero speed

 

Electronics

 

1. In the hybrid parameter model of a transistor reverse transfer voltage ratio and forward transfer current ratio are respectively given by:

 

(a) h11 and h21 (b) h12 and h11

(c) h21 and h11 (d) None of these

 

2. A Signal x(t) has the Fourier transform

 

X(?) = { 1 for | ? | < }W . Its first zero-crossing in time domain occurs at:

 

 otherwise

 

(a) 1/pW (b) W

( c) p/ W (d) None of these

 

 

Computer Science

 

1. Magnetic tapes are suitable to applications:

 

(a) When only a few records are to be accessed

(b) When most of the records are to be accessed

(c) Only when all the records are to be processed

(d) None of the above

 

2. A system in which 2 or more cpu’s are interconnected and share a common Main memory is called:

 

(a) Pipeline machine

(b) Multifunctional system

(c) Multiprocess

(d) None of these